We will introduce to you how the toothed grille is connected and installed
After welding, the grid should be Residues inside the grid plate are stopped and dirty, such as: paint, dirt, and even non-fire, all must be thoroughly calculated to ensure that the inside is clean; when welding, it will be used for general welding The method of delivery is that the welding seam is limited to a height of 20mm, and the height of the welding angle is not more than 6mm. At the end of the welding, the welding slag is eliminated, and the welding work is also complete.
Others include the design and layout of hot-dip galvanized steel grating, the production process of hot-dip galvanized steel grating, mistakes in the installation of hot-dip galvanized steel grating, illegal use and operation, etc.
High strength; its strength is rigid PVC Ten times, the absolute strength greatly exceeds that of steel, reaching the level of ordinary steel.
There are two ways to fix the grid plate: one is to use welding and the other is to fasten it with mounting clips. These two methods have their own advantages and disadvantages. The advantage of welding is that it is permanently fixed and will not loosen. The advantage of installation is that it will not damage the galvanized layer, and it is easy to disassemble. The safest thing is to not need to lower the clip, that is, to directly weld the screws on the beam, so that it will not loosen from the forehead of the beam and slip off.
The above is the relevant introduction about the connection and installation of the toothed grille, I hope it will be helpful for you to purchase the toothed grille.
Inquiry for Our Product
Hongkong Royce Metal Products Co., Ltd. E-mail: [email protected]
When you contact us, please provide your detail requirements. That will help us give you a valid quotation.